ITL DentalView Request for Information

  No. 1875 Micro-Dispenser 7000
  No. 1890 Micro-Dispenser 8000

Add to Request for InformationAdd to Request for Information

    State of art microprocessor-controlled units
    for implantology and micro-surgery.

    The MICRO-DISPENSER is controlled by microcomputer, which controls all functions. The necessary information is loaded into the computer by a keyboard panel and displayed.
    • The constant torque settings are maintained by the automatic torque control circuit. The torque is adjustable in 5 Ncm steps from 10 to 55 Ncm.
    • The torque is not dependent on motor speed (rpm.) 55 Ncm is available even at the lowest rpm for ease of tapping and insertion of implants. Handpiece and Contra Angles 1:5/1:1/16:1/70:1.
    • Built in irrigation system provides positive cooling irrigation to the drill. Both internal and/or external irrigation is available.
    • Footpedal controls the selected speed, forward / reverse and use of the pump.
    Advantages of the Double-Motor System:
    • There is the security of a backup.
    • There is the convenience of being able to use two different handpieces in one operation without the need to rewire and retube.
    • To change speed range, merely switch to the other handpiece.

    Voltage:
    Power:
    Type:
    Speed:
    Dimension:
    Net weight:     		230/115 V/ 50-60 Hz
    130 VA
    B
    2'000-30'000 Rpm
    170 x 100 x 95 mm
    2.5 kg

    No. 1840 Micromotor 31-S
    with high-torque standard E-Type adaptor for any
    E-Type contra angles and handpieces, autoclavable
    Max. motor-speed: 30,000 rpm.

 

Micro Dispenser 7000/8000 Technical Specifications (PDF)
Implant-Oral Surgery Handpieces | DynaTorq Wrench | Merus Electric Motor System
Step-Flow | Surgical Drilling Systems | Vibra Ject | VibraShield
Home | Contact Us | Distributor Information

ITL Dental
31 Peters Canyon
Irvine, CA 92606
Telephone: (800) 277-0073   (949) 223-8950
Fax: (949) 223-8960